Commercial kitchen equipment · Boxing County, Shandong

Built to your dimensions,
not to a catalogue

Non-standard is our normal case. Send a drawing, a sample, or just length × width × height — we cut, form and weld to it. Eight product families, cut through export packing under one roof.

2025Export operation founded
2014Production base established
8Product families
5MUSD export value / year
Custom
01 — Custom

From a sketch to a shipping mark

A fixed catalogue only works while the room is a standard size. Kitchens are not. So the drawing comes first and the price is built around it.

What you can specify: overall dimensions, shelf count and spacing, door handing, splashback and upstand height, castors or adjustable feet, and the cut-outs and interfaces for sinks and cooking equipment.

01

Drawing

A sketch, a photo of the space, a sample — or just length × width × height and what it has to do.

02

Quote

Priced against your drawing: material take-off, process and packing — not a list price with a surcharge added.

03

First-off

The first unit is checked and signed off against the drawing before the run continues.

04

Production

Fibre laser cut, CNC punched, CNC bent, then welded and dressed by hand.

05

Check & pack

Every unit measured before packing. Packed for sea freight, sized to the container.

Fabrication
02 — Stainless fabrication

Benches, sinks, racks, trolleys

Nothing in this block runs on a motor, a controller or a gas train. It is stainless sheet, tube and section — cut, formed, welded and dressed. Which means the entire specification is length, depth, height, thickness and finish, and any of those can be changed without touching a mould.

This is where most of our volume ships: kitchens that were designed around a room, not around a catalogue page.

Stainless steel work table with under shelf
Work TablesWith or without under shelf
Stainless steel folding table with folding legs, long top
Folding TableFolding legs, flat pack
Stainless steel folding table, compact square top
Folding TableCompact top, folding legs
Double bowl stainless steel sink
SinksSingle, double and multi-bowl
Dishwash sink with drainer
Dishwash SinksWith side drainer
Sink over cupboard base
Sink CabinetsSink over cupboard base
Four tier stainless steel shelving
Shelving & RacksSolid, perforated and slatted
Ventilated stainless shelving
ShelvingVentilated
Two tier stainless service trolley
Trolleys & Pan RacksService, scrap and flour
Stainless steel pan rack
Pan RackMobile
Scrap collection trolley
Scrap TrolleyCollection
Flour trolley
Flour TrolleyBakery
Multi-purpose work table
Work TableMulti-purpose
Waste cabinet with trolley
Waste StationCabinet with trolley
Food storage cabinet
Food CabinetStorage
Any size Not on this page? Send a length, a depth and a height, plus what the unit has to do. That is enough to start. How a custom unit is made →
Powered
03 — Powered equipment

Cooking and refrigeration

Gas, electric and refrigeration are kept in their own block because they carry ratings, controls and a spare-part commitment that a fabricated bench does not. Everything here is supplied alongside the stainless, so a complete cooking line ships in one container instead of three.

Four burner claypot range
Claypot RangeFour burner
Gas twin tank fryer
FryerGas, twin tank
Electric griddle plate
GriddleElectric flat plate
Combination steamer oven
Combi OvenSteam and convection
Counter top twin electric fryer
Counter FryerElectric, twin
Electric fryer with control panel
Electric FryerControl panel
Sandwich griddle
Sandwich GriddleCounter top
Four door stainless steel commercial refrigerator
RefrigerationUpright and counter
Refrigerated work table
Refrigerated TableUnder-counter
Shipping
04 — Logistics & shipping

Packed for the container, not for a pallet

A fabricated bench is mostly air once it is built. We plan the packing at quotation — knock-down where the volume justifies it, assembled where it does not — so the cube is filled rather than paid for twice.

01

Sea freight

Cost effective

  • Full container and LCL
  • Large capacity per shipment
  • Suitable for bulk and project orders
02

Air freight

Fast & efficient

  • Global air network
  • Quick delivery
  • Ideal for urgent orders and samples
03

Packing

Sized to the cube

  • Knock-down frames and flat tops
  • Crated, strapped and photographed
  • Packing list issued before dispatch
Secure delivery Crated and strapped for a sea voyage, photographed before the container is sealed.
On-time shipment Booking agreed against the production schedule, not against a promise.
Worldwide coverage Europe, North America, Southeast Asia and the Middle East.
Support
05 — After-sales

Warranty, spares, and someone who answers

A welded bench rarely needs us again. A fryer does. Support is set up around that difference: spares are held for the powered equipment, and drawings are held for every fabricated unit so a replacement panel can be cut years later.

01

One-year warranty

Against manufacturing defects on the units we supply.
02

24/7 support

One contact, not a ticket queue. Email and WhatsApp.
03

Technical support

Wiring, gas train and installation drawings for your contractor.
04

Global service

Spare parts shipped by air; remote guidance on site.
1

Contact us

Send the model, the order number and a photo of the fault.

2

Diagnosis

We identify the part and confirm it against the build record.

3

Repair

Part dispatched by air, or guidance given to your engineer.

4

Follow-up

The case is closed only once the unit is running again.

Factory
06 — Built to drawing

Every unit starts as a drawing

Production is based in Boxing County, Shandong — China's kitchenware capital. What reaches the line is a drawing, not a catalogue number: sheet is cut, punched and folded, then welded and dressed by hand. A unit 5 mm out will not sit against a wall, so it is measured before it is packed.

The three drawings below are reference geometry. Every dimension on them is yours to change.

Commercial kitchen layout plan, 8800 by 4900 mm, eight zones with equipment positions
Layout plan — 8 zones · 8800 × 4900 mm Indicative equipment positions · ZL-DWG-100 · scale 1:100
1200 850
Work tableFront elevation
W 1200 · D 600 · H 850
ZL-DWG-01SCALE 1:10mm
1200 600
Double bowl sinkPlan view
W 1200 · D 600 · bowl 500 × 400
ZL-DWG-02SCALE 1:10mm
1800 1000
Shelf unitSide elevation
W 1000 · D 400 · H 1800 · 4 tier
ZL-DWG-03SCALE 1:10mm
Layout
  • Zone split and adjacency
  • Single line or island cooking run
  • Pass-through or front-of-house plating
  • Cold-room vs reach-in refrigeration
Dimensions
  • Any bench length, depth, height
  • Sink bowl count and size
  • Upstand and splashback height
  • Shelf count and spacing
Services
  • Gas or electric cooking
  • Extraction hood footprint
  • Sink and appliance cut-outs
  • Floor drain and waste positions
Delivery
  • Knock-down for container fill
  • Pre-assembled where volume allows
  • Your drawing or ours
  • Your branding and model codes
StageEquipment / method
CuttingFibre laser
PunchingCNC turret punch
FormingCNC press brake
MachiningMechanical processing
JoiningWelding, seam dressed by hand
FinishDeburred, edges rolled
CheckDimensional check before packing
  • 01
    One roof, eight familiesWork tables through to cooking equipment — one enquiry instead of four suppliers.
  • 02
    Built for exportPacked for sea freight and sized to the container, not to a pallet standard.
  • 03
    OEM / ODMYour branding, your packaging, your model codes.
  • 04
    Since 2014Stainless steel cut, bent and welded on this site since 2014.
Certified
07 — Certification

Certified production

Our production base is certified to ISO 9001, ISO 14001 and ISO 45001, holds a national industrial production licence, and is CQC-certified for food-contact stainless steel to GB 4806.9-2023 — certificate CQC25036469688, valid to April 2030.

Certificates are issued to the manufacturing entity and are available on request; verification can be made through the CNCA register at www.cnca.gov.cn.

About
08 — About

Zhulian Chuanghui

Zhulian Chuanghui Science and Trade (Shandong) Co., Ltd. was set up in 2025 to take our stainless steel work into export markets, building on our own production base in Boxing County, Shandong — known as China's kitchenware capital — where stainless steel has been cut, bent and welded since 2014.

Custom work is the default here, not an upgrade. Send a drawing, or simply a length, a width and a height together with what the unit has to do, and we build to it. Non-standard sizes are what we handle every day.

The range runs from fabricated stainless — work tables, folding tables, sinks, shelving, trolleys and cabinets — through to refrigeration and Western cooking equipment. We export to Europe, North America, Southeast Asia and the Middle East, around USD 5 million a year, supplying importers, distributors and kitchen contractors.

Contact
09 — Contact

Send dimensions, get a price

Length × width × height, quantity, and whether you need gas or electric. A drawing is faster still.

Opens your mail app with the details filled in. No mail app? Use WhatsApp below, or write to zlchsd@163.com.

Email
zlchsd@163.com
Phone / WhatsApp / WeChat
+86 151 6509 0505
Website
zhulian-kitchen.com
Production base
Boxing County, Shandong, China
Custom work
Built to drawing — non-standard sizes are the normal case